# Simple habits that could have saved 4,600 service calls

Care & maintenance · By Rochester Appliance service team · Published November 9, 2026 · https://www.rochesterappliance.com/blog/habits-that-prevent-appliance-repairs

> About 4,700 of our service visits found no broken part, only lint, socks, clogged filters or the wrong detergent. Here are the habits that help prevent them, plus five things to check before you call.

## The short version

- 4,666 of our service visits were caused by upkeep or how the appliance was used, not by a broken part.
- Lint in the dryer, vent or blower housing caused 1,413 visits, more than any other upkeep problem. It's also a fire risk.
- Coins, socks and build-up in the washer drain pump caused another 1,067.
- On 1,944 visits the technician found nothing wrong. A few quick checks can sometimes save you that trip.

Not every service call is a broken appliance. When we sorted nearly 40,000 visits by what our technicians found, about 4,700 came down to maintenance or use: a vent packed with lint, a sock in the drain pump, a filter nobody knew existed. Most of them could have been avoided with a few minutes of routine care.

## What we find when nothing is broken

**The four most common upkeep and use problems, and the habit that helps prevent each**

| What we found | Visits | The habit that helps |
| --- | ---: | --- |
| Lint in the dryer, vent or blower housing | 1,413 | Clean the lint screen every load. Have the vent and blower housing cleaned every year. |
| Objects or build-up in the washer drain pump | 1,067 | Empty pockets. Wash socks, bras and small items in a mesh bag. |
| Clogged or dirty filter | 208 | Clean the dishwasher filter monthly. Change refrigerator water filters on schedule. |
| Too much or the wrong detergent | 190 | Use HE detergent in HE washers, measured, not poured. |

_Service visits from June 2014 through October 14, 2026. Each finding is counted once, under its first matching theme._

## More habits that help

- Have the dryer cleaned out once a year to keep rollers, pulleys and bearings quiet (184 visits).
- Vacuum refrigerator condenser coils twice a year (172 visits for dirty coils or dust).
- Wipe spills off burners and caps once they cool (143 visits for carbon on burners).
- Don't overfill the refrigerator or freezer, and keep the vents inside clear (107 visits for frost or blocked airflow).
- Learn where your control lock and delay-start buttons are (79 visits for a lock or setting left on).
- Run smaller loads (38 visits for an overloaded washer or dryer).
- Level appliances at install and after any move (33 visits).

## Dryer lint: the big one

Lint is the most common reason we're called to a dryer that isn't actually broken. The lint screen catches most of it, but some always gets past into the vent and blower housing. Over time it slows drying, overheats the dryer, blows the thermal fuse, and becomes a fire risk.

- Clean the lint screen before or after every load.
- Once a year, clean the vent all the way to the outside wall, and have the blower housing inside the dryer cleaned.
- Use rigid or semi-rigid metal vent duct, not white vinyl or foil, and keep it as short and straight as you can.
- Warning signs: clothes take two cycles to dry, the top of the dryer is hot, or the laundry room gets humid.

## The washer drain pump

Coins, hair ties, socks and underwire make their way into the drain pump, and the washer stops draining or makes a grinding noise. Many front-load washers have a pump filter behind a small door at the bottom front that you can clean yourself. Follow your owner's manual: unplug the washer, let any hot water cool, and drain the remaining water into a shallow pan before you open the filter. Keep towels handy.

## Before you call: five quick checks

On 1,944 visits, 5.1% of all completed visits, our technician found nothing wrong during the visit. Sometimes the cause was outside the appliance or a setting; sometimes an intermittent problem simply didn't show up. Before you book, try these checks and note any error code or pattern:

- Power: check the breaker, and plug a lamp into the outlet to make sure it works.
- Control lock: most models have a child lock that blanks or freezes the controls. Press and hold the lock button for about three seconds.
- Water: make sure the supply valves behind the washer, dishwasher or refrigerator are fully open.
- Door: washers, dryers and dishwashers won't start unless the door is fully latched.
- Settings: look for delay start, demo or Sabbath mode, or an oven left in self-clean lockout.

> **Still not working?.** If these checks don't solve it, [schedule a repair](/repair). Tell us the model number and what the appliance is doing, and our technician will arrive ready.

[Schedule a repair](/repair)

[Find filters and parts](/parts)

## Quick answers

### How often should I clean my dryer vent?

Once a year, all the way to the outside wall, along with the blower housing inside the dryer. Clean the lint screen every load. Lint in the dryer, vent or blower housing caused 1,413 of Rochester Appliance's service visits.

### Why won't my washer drain?

Most often something is stuck in the drain pump: coins, socks, hair ties or underwire. Objects or build-up in the drain pump caused 1,067 of our service visits. Many front-load washers have a pump filter behind a small door at the bottom front; follow the owner's manual, unplug the washer and drain the remaining water before opening it.

### What should I check before calling for appliance repair?

Check the breaker and outlet, the control lock, that the water supply valves are open, that the door is fully latched, and that no delay-start or special mode is on. Note any error code. Our technicians found nothing wrong on 5.1% of completed visits.

## How we got these numbers

From Rochester Appliance's own service records: 39,746 service orders from June 2014 through October 14, 2026, sorted by what the technician found.

- Rochester Appliance service records: 39,746 service orders from June 2014 through October 14, 2026. Each technician's notes were read and sorted by cause. Visits caused by maintenance or how the appliance was used are counted separately from failed parts.
- "Nothing wrong found" is its own result: 1,944 visits, 5.1% of completed visits.
