# Front-load or top-load? What Rochester buys, and how each holds up

Buying advice · By Rochester Appliance · Published November 5, 2026 · https://www.rochesterappliance.com/blog/front-load-vs-top-load-washers

> Rochester buys top-load washers about 2 to 1 over front-loads. Here's what each costs, how often each needed repairs in our records, what breaks on each, and how to choose.

## The short version

- Top-loads are about two-thirds of the washers we sell where the style is recorded; front-loads are about one-third.
- For in-box washers, the median top-load sold for $587 in 2026 and the median front-load for $797.
- In their second and third years, front-loads needed 0.79 repairs per 100 washers per year in our records and top-loads 1.4. The statistical ranges overlap, so neither style is clearly more reliable.
- Top-loads mostly fail on lid locks, belts and agitator parts. Front-loads mostly fail on drain pumps and door gaskets.

Front-load or top-load is the first decision in any washer purchase. Here's what our sales and service records say about each, followed by plain advice on choosing.

## Side by side

**Top-load and front-load washers at Rochester Appliance**

| Feature | Top-load | Front-load |
| --- | --- | --- |
| Share of washers sold | About 2 in 3 | About 1 in 3 |
| Median in-box price paid, 2026 | $587 | $797 |
| Repairs per 100 per year, years 2–3 | 1.4 | 0.79 |
| Most common failures | Lid lock, drive belt, agitator parts | Drain pump, door gasket |
| Water use | More | Less |
| Loading | From above; many let you add clothes mid-cycle | From the front; pedestals raise it, and most can stack |

_Washers whose style is recorded, sold April 2020 through October 2026. Repair rates count only repairs Rochester Appliance made on washers it sold, in their second and third years of use._

## What Rochester buys

Top-loads outsell front-loads about 2 to 1 at our store, and they cost less: the median in-box top-load sold for $587 in 2026, against $797 for a front-load. Like most appliances, both have gone up: the same washer models cost about 16% more in 2026 than in 2020.

## How each holds up

We matched the washers we've sold since 2020 to the repairs our technicians made for a failed part in their second and third years. Front-loads came out lower: 0.79 repairs per 100 washers per year (12 repairs in 1,512 years of use), compared with 1.4 for top-loads (55 in 3,946).

> **What these numbers can tell you.** The 95% ranges overlap (0.41–1.4 for front-loads, 1.0–1.8 for top-loads), so these records don't show a clear winner. Part of the top-load number also comes from a commercial-grade brand with a long factory warranty that we service as an authorized servicer, which brings more of its repairs to us. We wouldn't choose a style on reliability alone. Both hold up well.

## What breaks on each

- Top-load: the lid lock or lid switch is the most common failure. Drive belts and agitator parts follow. We've sold more than 400 agitator dogs alone at our parts counter.
- Front-load: the drain pump and the rubber door gasket are the usual suspects. Both are often caused by something left in a pocket.
- Both: tub bearings and transmissions are the repairs most likely to make a washer not worth fixing.

## Front-load care: stopping the smell

- Leave the door open a few inches between loads so the drum and gasket dry out.
- Wipe the folds of the door gasket and pull out anything caught there.
- Run the clean-washer cycle about once a month.
- Use HE detergent, measured. Extra soap leaves residue that feeds odor.
- Clean the drain pump filter a few times a year if your model has one. Follow the owner's manual: unplug the washer, let any hot water cool, and drain the remaining water into a pan before opening it.

## How to choose

- Choose a top-load if you want the lowest price, less bending, and (on many models) the option to toss in a sock mid-cycle.
- Choose a front-load if you want to use less water, get clothes out drier (shorter dryer times), or stack a compatible pair in a closet.
- Either way, put new hoses on your washer, and level it when it's installed.

[Shop washers](/washers)

[Shop laundry pairs](/laundry-pairs)

## Quick answers

### Are front-load or top-load washers more reliable?

Both hold up well. In Rochester Appliance's records, front-loads needed 0.79 repairs per 100 washers per year in their second and third years and top-loads 1.4. The statistical ranges overlap, so neither style is clearly more reliable.

### Do front-load washers cost more?

Yes. The median in-box front-load sold at Rochester Appliance in 2026 cost $797, against $587 for a top-load.

### How do I keep a front-load washer from smelling?

Leave the door open between loads, wipe the door gasket, run the clean-washer cycle monthly, use measured HE detergent, and clean the drain pump filter a few times a year as the owner's manual describes.

## How we got these numbers

From Rochester Appliance's own records: washers sold from April 2020 through October 2026 and the repairs our technicians made, followed through October 14, 2026.

- Rochester Appliance sales records: washers sold from April 28, 2020 through October 31, 2026 whose style (top-load or front-load) is recorded. Prices are the median price paid for in-box washers, before tax and delivery; open-box units and bulk orders are left out.
- Rochester Appliance service records through October 14, 2026: repairs for a failed part, counted per 100 washers per year of use in their second and third years, with 95% likely ranges of 1.0–1.8 (top-load) and 0.41–1.4 (front-load).
